This article is a continuation of Part I of the Water Filtration Facts and Fiction that I had posted last week in which I reviewed several different aspects for which consumers should be on the lookout when determining which water filtration system to purchase. Today I’m going to delve into greater detail with just ONE of those aspects. Sorry, but contrary to my thinking that I could do this all in a Part II version I was SO wrong and totally underestimated last week just how much material I had to cover, thus I've decided there is still at least another part of this series to come. Besides. I’m a girl. I can change my mind 99.9999% of the time if I want to, right? So, today I’m going to discuss the “nines” in the water filtration industry. This is, in my opinion, one of the two most common areas of misinformation in the water filtration and treatment industry.
What's the meaning of the "Nines" in water filtration?
Manufacturers will typically claim that their devices rid your water of a certain percentage of bacteria, cysts, viruses, etc. When you see one manufacturer claim “99.9%” and another claim “99.9999%” you may just think that one copywriter is more zealous than another. But there is actually a standard established by NSF as to how many logs (nines) that a filter must remove for specific types of contaminants. As such, you may actually see a manufacturer show the proper number of nines but they will also use some misleading words or symbols prior to those nines. I got so dizzy trying to understand the system behind this practice that I had to reach out to an expert, Dennis Brown of Aquamira. Dennis Brown is one of the few individuals I know I can trust to shoot straight with me in the water filtration industry. In fact, he actually resigned from a successful career in the pharmaceutical industry, one which benefited from his water purification designs. He left that industry in pursuit of his passion of providing quality potable water solutions for the world without any of the standard marketing practice nonsense. His filtration and treatment products are used daily all over the world among recreation, military, government, humanitarian, and commercial organizations which provide him with an active pulse and a great deal of feedback on their performance. I can’t expect for much more than that. (Let’s all say “Thank you, Dennis” for his generous contribution of time and expertise on several phone calls to help me navigate my way through the Nine Jungle!)
The importance of a symbol in understanding water filtration figures:
Before you get all impressed with just how many nines are used by a manufacturer conveyed in their marketing claims, pay special attention to the words and symbols in front of that number. Be very wary of words like ‘up to’ and ‘virtually’ in filter claims. As Dennis puts it, “both mean ‘almost’ or ‘not quite.” Science is one of the few things in life that can provide us with exactness. Water filtration is a science. If you’re reading a manufacturer’s claims and you see any of these types of “warm fuzzy” words, run away—far, far away. As an example, mosey on over to this popular brand website. Look in their very first paragraph. They state that their filter “removes up to 99.99% of the contaminants and pollutants”. (I’ll get into what else is wrong with the phrasing in a moment.) In fact, I found such “feel good, mean nothing” phrases such as “up to” used over 25 times on their corporate website before I decided I’d rather watch reruns of Gilligan’s Island than continue! Additionally, pay close attention to the “greater than” and “less than” signs. I, for one, suspect that these water filtration companies expect you to have forgotten which sign means what when they are describing their water filtration effectiveness. You don’t believe me? Then why in the heck do they all USE such a symbol to indicate what type of filtration success you can expect? Is it written in some kind of secret water engineering book somewhere? Just for clarification, the rule of thumb is that the small end of the V laying on its side (< or >) always points to the smaller component. For example, if you went to the Aquamira site right now and checked out the technology of their newest addition, the Divvy System, you would see that the test results show that it took care of GREATER THAN >99.99% virus, >99.9999% of bacteria, and removal of >99.9% of protozoan cysts. Whereas on four other sites (which brand names I won’t list here because I just may be opening myself up for a lawsuit even IF what I state is as plain as day TRUE) I see their test results saying “<99.99%” and even “<68.9999%”! Yes, that means that they are saying that their test results for bacteria manifested LESS THAN 99% and 68% respectively! Yum. No way can you get me to sign up and actually pay for that kind of water filtration. I can get that kind of "safe" using any ice dispenser at nearly any restaurant in the country. Now I can understand why Mr. Brown said, “the (percentage) number may look good, sound good, and is warm and fuzzy but is nothing more than a huge legal ruse.” Now, understanding that each type of contaminant has its own standard for the number of logs that must be removed and, it’s important that you keep in your cell phone or just plain memorize which contaminants require which number of log testing.
“Be leery of filters that claim to remove 99.99% bacteria. Since the NSF Standard is 99.9999%, any claim less than that is misleading, and should not be made.”—Dennis Brown, Aquamira
Last week I addressed this aspect from a very simplistic point of view, but Dennis gave me a much better appreciation of this frequently used fallacy. I previously mentioned that there are a standard number of logs that MUST be removed for each type of contaminant in order to have any bearing on the performance of the filtration device, and I gave an only partial explanation for this. The more appropriate information about this again comes from our Aquamira expert. Each 9/log indicated in the testing means that particular filter removed 10 times more organisms than the previous 9. When a water filtration company says that their water filtration system removes 99.99% of e-coli, that sounds pretty impressive, so a person thinks they are safe. But the standard NSF challenge requirement is six 9’s/logs, so that means they are two 9’s/logs off; which means that tens of thousands additional organisms got through. Can you imagine a water filter manufacturer admitting that?? The lesser 9’s/logs for cysts and viruses is adequate because it requires fewer of them to get you sick. But any manufacturer who tries to tell you that they did such a great job testing their water at 2, 3, or 4 logs on bacteria is definitely sorely mistaken and it’s YOUR LIFE and well-being at stake. As a further example, let’s say that we pitted two filters against each other. Both were challenged with 1 million organisms per 1 ml of water. Filter A removed all of them. Filter B had 10,000 left after filtering. This could conceivably result in a label of Filter A you put 99.9999 (6 logs) and Filter B 99.99% Obviously, Filter A is the better test result. As a reminder: bacteria requires a minimum of 6 logs removal testing, viruses: 4 logs of removal, and protozoan cysts require 3 logs of removal of testing. So now do you understand what is wrong with a manufacturer giving a blanket statement that their filter takes care of “99.99% of all contaminants”? Remember, not all contaminants are equal any more than a .22 rifle is just as good as a .45 when you’re up against a bear! One of the things that really frosted me about two of the most well-known water filter sites was that they had conflicting test results there. Three 9’s, four 9’s, six 9’s. Bottom line, pay attention to the NINES. As Dennis says, “They sound really good on a piece of marketing literature but all it is is a huge disclaimer that the manufacturer is buffalo-ing the consumer and absolves them of a liability claim”. Another stunt these water filtration companies pull is combining the nines to come up with their testing figures. For example, they will do the testing on one compartment of their system and get a three log or 99.9% removal of contaminants, (such as when testing for protozoa), and then they use the 2nd stage of their filter and get similar 3 log removal—for three more logs—for a total of 6 logs, right? 6 logs! That’s good enough for bacteria, right? WRONG-o! Sounds like someone might be employing the same man Clinton hired to come up with the “real” number for CPI. Ahem… As Dennis says, “you can’t add the nines. It just doesn’t work that way.” Next, it never gets any better than the 9’s, folks. Run far away from any manufacturer that says that they tested for bacteria, cysts, viruses, etc. and they got a 100% removal rate. It’s scientifically impossible to come up with a 100% number just as it’s impossible to see the true end of Pi. 100% is statistically impossible because you can’t challenge it with enough bacteria to derive the 100% conclusion. Also, remember, the term “non-detect” is NOT better than a “99.99%” A claim of “non-detect” for contaminants after going through a filter should always be held up against the standard number of logs/nines that the contaminant requires. Big deal if you can find no detection of bacteria at three 9’s. We’ve all seen a kid clean up their room only to find everything stashed and smashed in the closet and under the bed, right? (Remember, we’re talking about a industry and government standard here. When have you found that such standards were way this side of safe? Ambien, anyone? Cigarette? Ford Pinto? Vioxx?) I don’t know about you, but I want to stay as far away from the little buggers in my water as possible. If they don’t test far enough for contaminants, then it’s the same thing. You’re not checking thoroughly enough. Remember, each log, or each 9 reported, used in the testing, represents 10 times more organisms removed than the previous 9. In other words the 4th 9 in the number 99.99% represents ten times more organisms removed than the third 9 in the number expressed as 99.9%. So which would you rather have? A filter that removes 99.9% of the contaminants or 99.99%? Bottom line, remember that there’s no law that says you can’t sell a crappy water filter so long as you divulge to the consumer just how awful that filter is. And hey, if you can confuse them, why not; right? So, Consumer Beware—of the nines, that is. (If you’d like to read any of the writings of Dennis Brown and/or articles that he suggests, simply go to www.aquamira.com/suggested-links ) Author’s Note: I know that many of you were anxious for “part II” of this article so that I could share with you my findings on specific units. I apologize for disappointing you, but I felt that I really wasn’t doing the topic justice without getting into the nitty gritty of each significant component of the standards for water filters. As such, I anticipate spending another 2 or 3 articles exploring this topic. But please feel free to use what I share in each one of these articles to determine which water filtration unit is best for you. I intend them to be thorough enough for that purpose. I also want to note that even though I quote Mr. Dennis Brown repeatedly in this article, he is in no way responsible for its content. So if any one finds fault worthy of litigation or complaint in this article, I take full responsibility for the content written herein.
© 2013 Of COURSE this post is Copyright Protected by Preparedness Pro. All Rights Reserved. NO portion of this article may be reposted, printed, copied, disbursed, etc. without first receiving written permission by the author. This content may be printed for personal use only. (Then again, laws are only as good as the people who keep them.) Preparedness Pro will pursue all violations of these rights just as vigorously as she does any of her other freedoms, liberties, and protections.